Iwata Moisture Filter with Pressure Regulator and Gauge
FA600DH

Iwata Moisture Filter with Pressure Regulator and Gauge

$102.75

Iwata Moisture Filter with Pressure Regulator and Gauge is essential for optimizing the performance of both compressor and airbrush. The moisture filter uses a deflector plate to create a swirling air flow through a 5 micron element to ensure maximum water and dirt separation. The attached regulator features an adjustable locking knob and the gauge has a reading from 0-100 psi. This accessory can be attached either directly to the air source or inline between hoses. Includes thread sealant tape and adaptors. The Iwata Moisture Filter with Pressure Regulator and Gauge may be used with the Iwata Universal Spray Out Pot and Iwata Universal Airbrush Holder to complete the Iwata Workstation.

Artist, author and instructor Craig Fraser provides an overview of the Iwata Workstation composed of the Universal Spray Out Pot, Universal Airbrush Holder and the Filter Regulator. As Craig explains, while each of these products is a great addition to your set-up, put together they form a solid, fantastic workstation that will complement any type of airbrushing. 

FA600DH

Iwata Moisture Filter with Pressure Regulator and Gauge

$102.75